← List
Networks · Level 15: Routers and inter-VLAN routing
Cisco config · 75 points
✅ Solved
← #142
#144 →
🖧 #143. Router-on-a-stick: VLAN 10 and 30
A switch trunk is plugged into **GigabitEthernet0/0** on **Gate**. Route between the VLANs with subinterfaces:
- **Gi0/0.10**: 802.1Q, VLAN 10, address **192.168.10.1/24**
- **Gi0/0.30**: 802.1Q, VLAN 30, address **192.168.30.1/24**
- Turn on the main **Gi0/0** interface.
What to set up
- ○ Gi0/0.10: VLAN 10
- ○ Gi0/0.10: address
- ○ Gi0/0.30: VLAN 30
- ○ Gi0/0.30: address
- ○ Gi0/0 is on
💡 Type the commands one per line, the way you would on a real Cisco device. Short forms work too (conf t, int fa0/1, no shut). Lines like enable, configure terminal, exit and end are fine anywhere.