← List
Networks · Level 15: Routers and inter-VLAN routing
Cisco config · 75 points
✅ Solved
← #141
#143 →
🖧 #142. Switch management address: Lab-SW
So that switch **Lab-SW** can be managed over the network:
1. Give interface **VLAN 1** the address **192.168.164.2/24** and turn it on.
2. Set the default gateway to **192.168.164.1**.
What to set up
- ○ VLAN 1: 192.168.164.2/24
- ○ VLAN 1 is on
- ○ Gateway 192.168.164.1
💡 Type the commands one per line, the way you would on a real Cisco device. Short forms work too (conf t, int fa0/1, no shut). Lines like enable, configure terminal, exit and end are fine anywhere.