🖧 #135. Two VLANs: 10 and 30
On **S3**:
1. Create **VLAN 10** (**Students**) and **VLAN 30** (**Teachers**).
2. Make **FastEthernet0/11** an access port in VLAN 10.
3. Make **FastEthernet0/16** an access port in VLAN 30.
What to set up
- ○ VLAN 10
- ○ VLAN 10 name
- ○ VLAN 30
- ○ VLAN 30 name
- ○ Fa0/11: access
- ○ Fa0/11 → VLAN 10
- ○ Fa0/16: access
- ○ Fa0/16 → VLAN 30
💡 Type the commands one per line, the way you would on a real Cisco device. Short forms work too (conf t, int fa0/1, no shut). Lines like enable, configure terminal, exit and end are fine anywhere.