🖧 #132. Access port: Fa0/14 → VLAN 40
A computer in **VLAN 40** plugs into port **FastEthernet0/14** on **S3**. Put the port in access mode and assign it to VLAN 40. (VLAN 40 already exists.)
What to set up
- ○ Access mode
- ○ Assigned to VLAN 40
💡 Type the commands one per line, the way you would on a real Cisco device. Short forms work too (conf t, int fa0/1, no shut). Lines like enable, configure terminal, exit and end are fine anywhere.